Tascam US-122 Installation Instructions page 2

The "Start install" screen will appear.
Click on NEXT.
The "Reboot computer" screen will appear.
This screen will inform you that some components were not installed and it will
ask you to reboot your computer
Select "Yes, reboot my computer now".
Click on NEXT.
AFTER YOUR COMPUTER FULLY REBOOTS, PLUG IN YOUR US-122
DIRECTLY INTO YOUR COMPUTER USING THE CABLE THAT IS
PROVIDED. UNPLUG ANY USB DEVICE OR HUB THAT IS USING THE
SAME BUS EXCEPT FOR YOUR KEYBOARD AND MOUSE.
(2A)
Found New Hardware Screen should pop up.
The "Hardware Wizard" screen will appear.
Under "What do you want the wizard to do?",
select "Install from a list or a specific location (Advanced)".
Click on NEXT.
The "Please choose your search and installation options" screen will appear.
Put a Check in the box next to "Include this location in the search".
Verify that "C:\Programs Files\US122_Install" is in the location window.
If not, click on BROWSE to select it.
UNCHECK "Search removable media Floppy, CD-ROM" if checked.
Click NEXT.
A "Windows Logo testing warning" screen may appear.
If so, click on CONTINUE ANYWAY.
The "Completing the Found New Hardware Wizard" screen will appear.
Click on FINISH.
"FOUND NEW HARDWARE" SCREEN SHOULD POP UP, AGAIN.
Found New Hardware Screen should pop up.
The "Hardware Wizard" screen will appear.
Under "What do you want the wizard to do?"
Select "Install from a list or a specific location (Advanced)".
Click on NEXT.
The "Please choose your search and installation options" screen will appear.
Put a Check in the box next to "Include this location in the search".
Verify that "C:\Programs Files\US122_Install" is in the location window.