Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Installation Manual
Advertisement
Table of Contents
Related Manuals for Targus PA610U
Summary of Contents for Targus PA610U
- Page 1 Targus Low Power Ethernet Card Mobile Computer ™ Low Power Ethernet Card ® User’s Guide...
-
Page 2: Chapter 1 - Quick Start
Chapter 1 - Quick Start Overview This chapter summarizes how to install the LP-E Card software for Pocket PCs and Windows CE-based Palm-size PCs, Handheld Pros, or pen tablets. It assumes you are familiar with network settings and the devices you are using. For more detailed instructions, refer to page 10, or Pocket PCs... - Page 3 Quick Start Pocket PCs SETUP NOTE: If asked to confirm file replacing, choose Yes to All. When downloading is complete, click OK. Reset your Pocket PC to load the new software. When Setup is complete, click OK and remove your Pocket PC from its cradle.
- Page 4 By default, ActiveSync starts whenever you insert the LP-E Card. To prevent this, or to run a different program when you insert the card, use Targus’ LP-E Card Applet. This applet enables you to: Specify which program (if any) to launch automatically...
- Page 5 NOTE: For instructions on card insertion, refer to Connecting the LP-E Card to Your page 36. When the Targus LP-E Driver message appears, tap Use the IP Address screen to configure your network settings, then tap OK. from the CD-ROM.
- Page 6 By default, ActiveSync will be initiated every time you insert the LP-E Card. To prevent this, or to run a different program when you insert the card, you can use Targus’ LP-E Card Applet. This applet also allows you to control other unique features of Targus’...
-
Page 7: Chapter 2 - Introduction
How This Manual Is Organized This manual is designed to help you install and operate the CompactFlash version of Targus’ Low Power Ethernet (LP-E) Card on a Windows Powered Pocket PC or a Windows CE-based Palm-size PC, Handheld Pro or pen tablet. -
Page 8: Key Features
Introduction Features Features Targus’ Low Power Ethernet Card is the first Ethernet adapter compatible with Windows Powered Pocket PCs and Windows CE-based mobile computers, including Palm-size PCs, Handheld Pros, and pen tablets. You can use the LP-E Card with Microsoft’s ActiveSync... - Page 9 Introduction Key Features Targus’ LP-E Card Applet for mobile computers includes icons that display GoodLink and Activity on the Windows status bar. You can use the applet to enable or disable automatic program launching. This applet also shows consolidated network data such as the LP-E Card’s IP Address, MAC address, gateway address,...
-
Page 10: Chapter 3 - Pocket Pc
Chapter 3 - Pocket PC Setup Overview This chapter describes how to install the LP-E Card software, configure network settings, and manage the LP-E Card Applet for a Windows Powered Pocket PC. After installing the LP-E Card, you will no longer require a serial connection for tasks such as synchronization, backup, program installation, email or web browsing. - Page 11 Pocket PC Setup What You Need to Know Make a copy of the Network Information Form and ask your network administrator to fill it out so that you can complete this installation. Network Information Form Dialup number: ______-_______-___________ User name: ____________________________ Password: _____________________________ Does your LAN support DHCP (Dynamic Host Configuration Protocol)?
-
Page 12: Software Installation
Pocket PC Setup Software Installation Software Installation This procedure applies only to Pocket PCs. NOTE: Install the software BEFORE inserting the LP-E Card. Connect your Pocket PC to a host PC using the synchronizing cradle and cable that came with your Pocket PC. - Page 13 Pocket PC Setup Software Installation Plug the LP-E Card into an active Ethernet connection. HINT: The host PC must be connected and currently logged into the same network as your Pocket PC. Insert the LP-E Card into your Pocket PC’s CompactFlash I/O card slot.
- Page 14 Pocket PC Setup Software Installation Configure Network Settings You can change the network configuration at any time using the IP Address screen on your Pocket PC. NOTE: Before configuring network settings, check that the LP-E Card is connected to an active Ethernet connection and inserted into your Pocket PC.
- Page 15 Pocket PC Setup Software Installation Tap Targus LP-E Driver. The IP Address screen appears. Select if you are using a server-assigned IP address (or DHCP), or a specific IP address. DEFINITION: DHCP (Dynamic Host Configuration Protocol) - the protocol that enables a network to automatically assign a temporary IP address to a host when it connects to the network.
- Page 16 Pocket PC Setup Software Installation NOTE: If you use a specific (also called “static”) IP address instead of DHCP, you may need to enter the IP address of the host computer in the Primary WINS field ActiveSync. Tap the Name Servers tab and enter DNS and WINS addresses (if needed), then tap OK.
- Page 17 LP-E Card. If you do not want to run ActiveSync automatically, or you want to run a different program, you can use Targus’ LP-E Card Applet. This applet also allows you to control other unique features of Targus’ Ethernet software.
- Page 18 (LP-E network Activity detected) The two slide switches under each option box let you determine how often the Targus Ethernet driver checks network status. If you drag a gauge needle towards Slow, the corresponding indicator will remain longer in its most recent state.
- Page 19 Choose a program to run… box. The number in the delay before launch box controls how many seconds the Targus Ethernet driver will wait after card insertion before attempting to make a network connection or launch a program. Usually you can leave this number at its default value but, if you are having difficulty attaching to your network, you can try increasing the delay.
- Page 20 Pocket PC Setup LP-E Card Applet In the Settings window, tap the Targus LP-E icon. You will see the IP Info tab of the Targus LP-E Settings window. To change any of the IP addresses, follow the instructions in Configure Network NOTE: The MAC address is a unique identification number programmed permanently into the LP-E Card.
-
Page 21: Chapter 4 - Windows Ce
Chapter 4 - Windows CE Setup Overview This chapter describes how to install the LP-E Card software, configure network settings, and manage the LP-E Card Applet for a Palm-size PC, Handheld Pro, or pen tablet mobile computer running Windows CE Version 2.11 or greater. - Page 22 Windows CE Setup What You Need to Know Make a copy of the Network Information Form and ask your network administrator to fill it out so that you can complete this installation. Network Information Form Dialup number: ______-_______-___________ User name: ____________________________ Password: _____________________________ Does your LAN support DHCP (Dynamic Host Configuration Protocol)?
- Page 23 This procedure applies only to Windows CE-based mobile computers. The Windows CE screens you see may differ from the examples given depending on the type of mobile computer you use. Targus’ SETUP program automatically detects the type of device you have and installs the appropriate software.
- Page 24 NOTE: For instructions on card insertion, refer to Connecting the LP-E Card to Your page 36. Targus’ Ethernet driver displays the network icon on the Windows CE status line and launches ActiveSync automatically. When your mobile computer displays the Targus LP-E Driver message, tap OK.
- Page 25 Windows CE Setup Software Installation The IP Address screen appears. Select if you are using a server-assigned IP address (or DHCP), or a specific IP address. DEFINITION: DHCP (Dynamic Host Configuration Protocol) - the protocol that enables a network to automatically assign a temporary IP address to a host when it connects to the network.
- Page 26 Windows CE Setup Software Installation Remove the LP-E Card from your mobile computer. Reinsert the LP-E Card into your mobile computer and plug the LP-E cable into the network. CAUTION: The new IP settings will not take effect until you reinsert the card.
- Page 27 LP-E Card. If you do not want to run ActiveSync automatically, or if you want to run a different program when you insert the card, you can use Targus’ LP-E Card Applet. This applet also allows you to control other unique features of Targus’...
- Page 28 To open the applet on a Handheld Pro or pen tablet, tap Start/Settings/Control Panel, then double-tap the Targus LP-E icon. When you open the applet, you will see the Targus LP-E screen. The IP Info tab displays a convenient layout of important IP...
- Page 29 Addresses, on page 33. Tapping on the Indicators tab displays the network status indicators. NOTE: By default, Targus’ driver shows the network icon in the Windows CE status bar to indicate GoodLink (10BaseT only) and Activity. If you check the box labeled Turn on good link taskbar...
- Page 30 (Activity detected) The two slide switches under each option box let you determine how often the Targus Ethernet driver checks network status. If you drag a gauge needle towards Check less often, the corresponding indicator will remain longer in its most recent state.
- Page 31 The number in the second delay before launch box controls how many seconds the Targus Ethernet driver will wait after card insertion before attempting to make a network connection or launch a program. Usually you can...
- Page 32 Windows CE Setup Launching ActiveSync Manually Launching ActiveSync Manually To launch ActiveSync manually on your mobile computer, follow these steps: Tap Start/Programs/Communication/ActiveSync. You should see: Tap the Connect… button. Your host PC should display a series of synchronization status screens similar to: In a few seconds, your mobile computer should display the Connection Status screen and report that the connection is up-to-date.
-
Page 33: Changing Ip Addresses
39. Changing IP Addresses Targus’ LP-E Card Applet allows you to view IP settings but not to modify them. To modify any IP addresses used to set up the LP-E, you must run the Windows CE Network applet. - Page 34 Windows CE Setup Changing IP Addresses On an Handheld Pro or pen tablet, you can run the Windows CE Network applet by tapping Start/Settings/ Control Panel and double-tapping the Network icon: On a Palm-size PC, the Network Configuration screen looks like this:...
- Page 35 Windows CE Setup Changing IP Addresses Tap Targus LP-E Driver to see the IP Settings screen. Follow the instructions under Software Installation, steps 7 through 11.
-
Page 36: Chapter 5 - Hardware Setup
Chapter 5 - Hardware Setup Overview This chapter explains how to connect the LP-E Card to your computer and to your Ethernet network, how to insert and remove the card, and the effects of leaving the LP-E Card in your computer. Connecting the LP-E Card to Your Computer The LP-E Card fits in the CompactFlash I/O card slot on your Palm-size PC, Handheld Pro or pen tablet. - Page 37 Hardware Setup Connecting an RJ-45 Ethernet Cable The LP-E Card should fit easily into the CompactFlash I/O card slot. If you encounter resistance, make sure the card is aligned right-side up. Do not force the card into the slot. Connecting an RJ-45 Ethernet Cable To connect the LP-E Card to your network, plug the Ethernet adapter module into an active Ethernet port or hub via an RJ-45 cable (cable not included).
- Page 38 While your computer is on, the LP-E Card draws current even when it is not connected to an Ethernet network. Targus recommends that you remove the LP-E Card, when you are not using it, to conserve battery power. Black Bezel...
-
Page 39: Troubleshooting
Chapter 6 - Troubleshooting Overview This chapter discusses some of the problems you may encounter using the LP-E Card with Windows CE V2.11 and higher. My New IP Addresses Don't Work After you run the Network program to change IP addresses for your LP-E Card, you must remove and reinsert the card before the changes will take effect. - Page 40 Primary WINS: field in order to use ActiveSync. I Get an “Error Starting Program” Message When you install the LP-E Card or other Targus product and you get a message similar to “Error starting program, a required dll file PPCLOAD.DLL not found,” you probably...
-
Page 41: If You Still Have Problems
If You Still Have Problems If You Still Have Problems If you cannot resolve a technical problem with the LP-E Card, contact Targus' technical support department. Before contacting Targus, have the following information available: Serial number of your LP-E Card Operating system information for your: •... -
Page 42: Appendix: Specifications
Appendix - Specifications Physical Characteristics CompactFlash CF Card: Dimensions: Weight: Cable with RJ-45 Ethernet Module: Module Dimensions: Interconnect Cable: Weight: Power Consumption (supplied by PC host) Active With 3.3V Supply: 1.43 x 1.69 x 0.13 inches (36.4 x 42.8 x 3.3 mm) 0.32 oz. -
Page 43: Ethernet Interface
Ethernet Interface Ethernet Interface Protocol: Module Connector: Software Included LP-E Driver Setup: Windows CE LP-E Card Applet Compatibility Network Interface Card: Performance Ethernet Transfer Rate: 10BaseT (IEEE 802.3) Twisted Pair RJ-45 female connector Runs on Windows CE 2.11 or Pocket PC NE2000 10 megabits per second... -
Page 44: Warranty
Certification Certification FCC: C-Tick: Warranty CompactFlash CF Card: Non-removable Cable: Part 15, Class B EN55022 N2953 Lifetime Lifetime... -
Page 45: Copyright Notice
Copyright Notice Copyright © 2000 Targus Group International, Inc. All rights reserved. Targus and the Targus logo are registered trademarks of Targus Group International. Battery Friendly is a trademark of Socket Communications, Inc. Windows CE and Windows Powered Pocket PC are registered trademarks of Microsoft Corp. -
Page 46: Technical Support
Washington, D.C. 20402. Warranty Targus warrants this product to be free from defects in materials and workmanship for its lifetime. If your Targus Low Power Ethernet Card is found to be defective within that time, we will promptly repair or replace it. - Page 47 Euorpe Belgium Denmark France Germany Italy Netherlands Spain Sweden Switzerland Eastern Europe and Others +32 (0) 02-717-2451 +45 (0) 35-25-8751 +33 (0) 1-64-53-9151 +49 (0) 21-16-579-1151 +39 (0) 24-827-1151 +31 (0) 53-484-9470 +34 (0) 91-745-6221 +46 (0) 8-751-4058 +41 (0) 1-212-0007 +44 (0) 20-7744-0330 +31 (0) 53-484-9479...
- Page 48 NEW YORK • LOS ANGELES • TORONTO • TOKYO • HONG KONG SINGAPORE • SYDNEY • LONDON • PARIS • BRUSSELS • HANNOVER MILANO • BARCELONA • AMSTERDAM Features and specifications are subject to change without notice. ©2000 Targus Corp. 400-0016-001A...