COSORI CO117-DK - Original Digital Glass Kettle Manual

Package Contents

1 x Digital Glass Kettle
1 x Power Base
1 x User Manual

Specifications

IMPORTANT SAFEGUARDS

Always follow basic safety precautions when using your kettle.
Read all instructions.

Do not touch hot surfaces. Use handle. Do not touch the base or glass parts of the kettle during or immediately after operation.

Do not fill the kettle above the "MAX" line. This may cause water to boil over and may cause scalding.

Always handle with care when there is hot water inside the kettle to avoid scalding.

• Do not immerse the kettle, base, cord, or plug in water or other liquids.
• Closely supervise children near the kettle. Do not allow children to use or play with this kettle.
• Unplug the kettle when it is not being used and before cleaning. This will avoid electric shock and prevent moisture from causing a short circuit in the power base while it is plugged in.
• Allow to cool before putting on or taking off parts, and before cleaning.
• Do not use the kettle if it is malfunctioning, broken or chipped, or if the power cord or plug is damaged in any way. Do not try to repair the kettle. Contact Customer Support.
• Using accessory attachments not recommended by the manufacturer may result in fire, electric shock, or injury.
• Do not use outdoors.
• Place the kettle on a dry, flat surface. Do not place the kettle on or near heat sources such as stovetops, ovens, radiators, etc.
• Always make sure the lid is closed while the kettle is operating. Do not cover the spout opening while the kettle is operating.
• To disconnect, use the START/CANCEL button to turn the kettle off, then remove the plug from the wall outlet.
• Only use the kettle as directed in this manual.
• Household use only.

SAVE THESE INSTRUCTIONS

Plug & Cord

• Do not let the cord (or any extension cord) hang over the edge of a table or counter. Do not allow the cord to touch hot surfaces.
• This kettle has a 3-prong grounding plug. Always plug in to a grounded electrical outlet. Do not modify the plug in any way.
• This kettle uses a short power-supply cord to reduce the risk of entangling or tripping. Use extension cords with care.
• Any extension cord must also be a groundingtype 3-wire cord.
• The marked electrical rating of an extension cord should be at least as high as the rating of the kettle.

Electric Power

• If the electrical circuit is overloaded with other appliances, this kettle may not operate properly. The kettle should be operated on a separate electrical circuit from other appliances.

GETTING TO KNOW YOUR GLASS KETTLE

A.

1. Filter
2. Spout
3. Lid
4. Kettle
5. Heating Plate
6. Power Base
7. Lid Release Button
8. Handle

Note:

• The filter is made with food-grade stainless steel.

Controls

1. 165°F DELICATE
   Sets the kettle to 165°F / 74°C, the ideal temperature for delicate tea.
2. 175°F WHITE
   Sets the kettle to 175°F / 80°C, the ideal temperature for white tea.
3. 180°F GREEN
   Sets the kettle to 180°F / 82°C, the ideal temperature for green tea.
4. 195°F OOLONG
   Sets the kettle to 195°F / 91°C, the ideal temperature for oolong tea.
5. 200°F COFFEE
   Sets the kettle to 200°F / 93°C, the ideal temperature for coffee.
6. BOIL BLACK
   Sets the kettle to 212°F / 100°C to bring water to a boil. This is the ideal temperature for black tea.
7. START/CANCEL

• Press any time to start or cancel heating.
• Press and hold for 3 seconds to turn Keep Warm Mode on/off.

BEFORE FIRST USE

Water Test

Perform the Water Test before using your kettle to make sure it's working properly. Do not drink the water that is boiled during this test.

1. Remove all packaging from your kettle and its accessories.
2. Completely unravel the power cable and place the power base on a flat, level, stable surface.
3. Fill the kettle with water to the "MAX" line, then put the lid on the kettle. [Figure 1.1-1.2]
   
4. Press BOIL BLACK. Then, press START/CANCEL to begin heating.
5. Turn off the kettle once it has finished boiling the water. Allow it to cool, then pour out the water. Rinse thoroughly 2–3 times with cold water.

USING YOUR GLASS KETTLE

CARE & MAINTENANCE

Note: Do not remove the filter from the lid. Doing so will break the filter.

Cleaning

1. Unplug the kettle and allow it to cool before cleaning.
2. Wipe the kettle and base with a soft, damp cloth. Make sure the electric socket on the underside of the kettle is kept dry.
3. Dry all parts after every use.

Note: Never immerse kettle or power base in water.

Descaling the Kettle

You should descale the kettle at least once a week if you use it frequently. Descaling removes any mineral deposits that have built up inside the kettle. Always descale the kettle before and after storing for long periods of time.

1. Unplug the kettle and pour out all water. Make sure the kettle is cool.
2. Squeeze half a lemon into the kettle, or add ½ US cup / 118 mL of distilled vinegar into the kettle.
3. If the kettle has thick scale buildup, scrub the inner walls with a nonscratch scrub sponge.

Note: Do not use steel wool, as this can scratch the kettle.

4. Add 2 US cups / 473 mL of water. Boil the mixture.
5. Pour out the mixture, then wipe off any remaining scale with a non-abrasive cloth, sponge, or cleaning brush.
6. Repeat as needed.

Note: For quick descaling, add 3 US tbsp / 44 mL of baking soda and ½ US cup / 118 mL of vinegar into the kettle. Swirl the mixture around until it coats the walls of the kettle, wipe with a nonscratch sponge, and pour the mixture out. This method will only work for a thin layer of scale.