COSORI CO171-GK2 - Original Electric Glass Kettle Manual

COSORI CO171-GK2 - Original Electric Glass Kettle Manual

Also See for CO171-GK2:

Advertisement

COSORI CO171-GK2 - Original Electric Glass Kettle Manual

Package Contents

1 x Electric Glass Kettle
1 x Power Base
1 x User Manual

Specifications

Power Supply AC 120V, 60Hz
Rated Power 1500W
Capacity 7 cups / 1.7 L
Dimensions 7.9 x 6.1 x 9.5 in / 20.1 x 15.5 x 24.1 cm
Weight 2.6 lb / 1.2 kg

IMPORTANT SAFEGUARDS

Always follow basic safety precautions when using your kettle.
Read all instructions.

  • Do not touch hot surfaces. Use handle. Do not touch the base or glass parts of the kettle during or immediately after operation.
  • Do not fill the kettle above the "MAX" line. This may cause water to boil over and may cause scalding.
  • Always handle with care when there is hot water inside the kettle to avoid scalding.
  • Do not immerse the kettle, base, cord, or plug in water or other liquids.
  • Closely supervise children near the kettle. Do not allow children to use or play with this kettle.
  • Unplug the kettle when it is not being used and before cleaning. This will avoid electric shock and prevent moisture from causing a short circuit in the power base while it is plugged in.
  • Allow to cool before putting on or taking off parts, and before cleaning.
  • Do not use the kettle if it is malfunctioning, broken or chipped, or if the power cord or plug is damaged in any way. Do not try to repair the kettle. Contact Customer Support.
  • Using accessory attachments not recommended by the manufacturer may result in fire, electric shock, or injury.
  • Do not use outdoors.
  • Place the kettle on a dry, flat surface. Do not place the kettle on or near heat sources such as stovetops, ovens, radiators, etc.
  • Always make sure the lid is closed while the kettle is operating. Do not cover the spout opening while the kettle is operating. Do not cover the slits near the On/Off Switch.
  • To disconnect, use the On/Off Switch to turn the kettle off, then remove the plug from the wall outlet.
  • Only use the kettle as directed in this manual.
  • Household use only.

SAVE THESE INSTRUCTIONS

Plug & Cord

  • Do not let the cord (or any extension cord) hang over the edge of a table or counter. Do not allow the cord to touch hot surfaces.
  • This kettle has a 3-prong grounding plug. Always plug in to a grounded electrical outlet. Do not modify the plug in any way.
  • This kettle uses a short power-supply cord to reduce the risk of entangling or tripping. Use extension cords with care.
  • Any extension cord must also be a grounding-type 3-wire cord.
  • The marked electrical rating of an extension cord should be at least as high as the rating of the kettle.

GETTING TO KNOW YOUR GLASS KETTLE

GETTING TO KNOW YOUR GLASS KETTLE

  1. Filter
  2. Spout
  3. Lid
  4. Kettle
  5. Heating Plate
  6. Indicator Light
  7. Power Base
  8. Lid Release Button
  9. Handle
  10. On/Off Switch

Note:

  • The filter is made with food-grade stainless steel.
  • Do not unscrew or remove the filter unless instructed by Customer Support.

BEFORE FIRST USE

Water Test

Do not remove the glass kettle from the package if it is broken. Contact Customer Support immediately to replace your kettle.

Perform the Water Test before using your kettle to make sure it's working properly. Do not drink the water that is boiled during this test.

  1. Remove all packaging from your kettle and its accessories, including any temporary stickers.
  2. Completely unravel the power cable and place the power base on a flat, level surface.
  3. Press the Lid Release Button to open the lid. [Figure 1.1]
  4. Fill the kettle with water to the "MAX" line, then close the lid. [Figure 1.2] Place the kettle onto the power base and plug in.
    Water Test
  5. Press the On/Off Switch. The blue indicator light will turn on. [Figure 1.3]
  6. The kettle will automatically turn off once it has finished boiling the water. Allow it to cool for at least 5 minutes, then pour out the water.

USING YOUR GLASS KETTLE

Boiling Water

Do not boil other liquids in this kettle. This kettle should only be used for boiling water.

  1. Press the Lid Release Button to open the lid.
  2. Fill the kettle to the desired level. Do not fill above the "MAX" line. [Figure 2.1]
    Boiling Water - Step 1
  3. Close the lid and place the kettle onto the power base and plug in. [Figure 2.2]
    Boiling Water - Step 2
  4. Press the On/Off Switch. The blue indicator light will turn on. [Figure 2.3]
  5. The kettle will automatically turn off once it has finished boiling the water.

Note:

  • Always fill the kettle with water to at least the "MIN" line to prevent overheating.
  • You can stop the heating process by flipping the On/Off Switch back up while the kettle is operating.
  • This kettle has a dry-run safety feature. If there is no water inside the kettle, it will automatically turn off to prevent the heating plate from overheating.
  • If the kettle overheats, fill it with cold water and wait for 2 minutes before using again.

CARE AND MAINTENANCE

Cleaning

  1. Unplug the kettle and allow it to cool before cleaning.
  2. Wipe the kettle and base with a soft, damp cloth. Make sure that the electric socket on the underside of the kettle is kept dry.
  3. Dry all parts after every use.

Note: Never immerse kettle or power base in water.

Descaling the Kettle

You should descale the kettle at least once a week if you use it frequently. Descaling removes any mineral deposits that have built up inside the kettle. Always descale the kettle before and after storing for long periods of time.

  1. Unplug the kettle and pour out all water. Make sure the kettle is cool.
  2. Squeeze half a lemon into the kettle, or add ½ US cup / 118 mL of distilled vinegar into the kettle.
  3. If the kettle has thick scale buildup, scrub the kettle's inner walls with a non-scratch scrub sponge.
    Note: Do not use steel wool, as this can scratch the kettle.
  4. Add 2 US cups / 473 mL of water. Boil the mixture.
  5. Pour out the mixture, then wipe off any remaining scale with a non-abrasive cloth, sponge, or cleaning brush.
  6. Repeat as needed.
    Note: For quick descaling, add 3 US tbsp / 44 mL of baking soda to ½ US cup / 118 mL of vinegar into the kettle. Swirl the mixture around until it coats the walls of the kettle, wipe with a non-scratch sponge, and pour the mixture out. This method will only work for a thin layer of scale.

Questions or Concerns?

Mon —Fri, 9:00 am—5:00 pm PST/PDT
support@cosori.com | (888) 402-1684


join the Cosori Cooks Community on Facebook
facebook.com/groups/cosoricooks


explore our recipe gallery
www.cosori.com/recipes


enjoy weekly, featured recipes
made exclusively by our in-house chefs

CONTACT OUR CHEFS

Our helpful, in-house chefs are ready to assist you with any questions you might have!

Email: recipes@cosori.com
Toll-Free: (888) 402-1684
M–F, 9:00 am—5:00 pm PST/PDT

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download COSORI CO171-GK2 - Original Electric Glass Kettle Manual

Advertisement

Need help?

Need help?

Do you have a question about the CO171-GK2 and is the answer not in the manual?

Questions and answers

Table of Contents