Aqara Cube - Smart Wireless Controller Quick Start Guide

Product Introduction

Aqara Cube is a smart wireless controller that recognizes multiple actions. Configure the Cube via app, and you can use it to control various smart accessories through linkage control.

• A hub is required.
• This product is for indoor use only.

Reset Button
Long Press for 5s: Reset/Connect to Network
Single Press: E ective Range Test

Quick Setup

1. Before activating the accessory, please make sure you have the Aqara Home app downloaded and Aqara hub installed.
2. Please open the app, tap "Home" and then tap "+" in the top right corner to enter "Add Device (Accessory)" page. Select "Cube", and add it according to instructions.

* If the connection fails, please move the accessory closer to the Hub and try again.

Effective Range Test: Single swing the Cube or single press the reset button in the Cube. If the Hub makes voice prompts, it indicates that the Cube can communicate effectively with the Hub.

* Avoid metal surface to maximize signal strength.

Specifications

Model: MFKZQ01LM
Dimensions: 45 × 45 × 45 mm (1.77 × 1.77 × 1.77 in.)
Wireless Protocol: Zigbee
Battery: CR2450
Operating Temperature:-10° - +50°C (14° - 122°F)
Operating Humidity: 0 – 95% RH, no condensation
Maximum Transmit Power (Zigbee): 9.99 dBm
Working Frequency: 2400 MHz – 2483.5 MHz
Online Customer Service: www.aqara.com/support
Email: support@aqara.com

1. This product is NOT a toy. Please keep children away from this product.
2. This product is designed for indoor use only. Do NOT use in humid environments or outdoors.
3. Beware of moisture, do NOT spill water or other liquids onto the product.
4. Do NOT place this product near a heat source. Do NOT place it in an enclosure unless there is normal ventilation. Do NOT attempt to repair this product by yourself.
5. All repairs should be performed by an authorized professional.
6. This product is only suitable for improving the entertainment, convenience of your home life and reminding you about the device status. If a user violates the product use instructions, the manufacturer will NOT be liable for any risks and property losses.

Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China.