Clock Adjustment; Radio Function - Nevir NVR-716MCDUB User Manual

CLOCK ADJUSTMENT

To setup the time of the unit:
1. Connect the AC power cord (The following operation must be done in standby mode).
2. Press the TIME/PROGRAM button to enter into time setting mode. The time will flash on the LCD
display.
3. Press the BACK or NEXT buttons to select the time format 12h or 24h to adjust the time.
4. After setting the time, press the TIME/PROGRAM button to confirm.
5. Then you can set the hour and the minute with the same method of steps 3-4.
6. After setup the unit time, long press TIME/PROGRAM button to set the time to working automatically,
with the same method of steps 3-4.

RADIO FUNCTION

Radio reception
1. Press the FUNCTION button to select the "RADIO" mode.
2. Tune to the required station by pressing BACK or NEXT
Manual Tuning: Press BACK or NEXT and then release within 1 sec.
Auto Tuning: Press the Play/Pause button to enter the automatic channel search mode.
Preset Channel:(FM 30 Preset memories)
(1) Press the BACK or NEXT to select the desired station.
(2) Press the PROGRAM button once and the MEMORY number indicator will begin to flash on
the display.
(3) Press the PRE-UP or PRE-DN buttons to select the desired station number.
(4) Press the PROGRAM button to save the station.
(5) Repeat steps (1) to (4) procedures for storing the rest of the stations.
3. After storing the stations, press PRE-UP or PRE-DN to play the selected frequency.
4. Press [VOL-]or [VOL +] to adjust the volume level.
5. Extend the telescopic antenna to its full length while listening in FM mode and for better reception.
6. Turn off the radio by pressing the FUNCTION button. Select any other mode or press the power button
to off the unit.
7. The preset memories will be stored even though the unit is switched off and on.
USEING THE BLUETOOTH FUNCTION
Press the FUNCTION button to select to Bluetooth mode.
Search for the Bluetooth device " NVR-716MCDUB" on your mobile device. Select the device
from your handset in order to establish a connection.
1. Press PLAY/PAUSE button to play or pause playback.
2. Press [VOL-] or [VOL+] to adjust the volume.
3. Press BACK or NEXT to select tracks.
NOTE: The Bluetooth effective receiving distance is of about 10 Metres. Different Bluetooth
devices may vary. Please read the instructions carefully before using any Bluetooth device
(PHONE, IPAD, MOBILE PHONE, ETC.)
EN-6