Panasonic DMP-BDT230 Operating Instructions Manual page 26

Using the Digital Media
Controller
You can use a smartphone or tablet as the Digital
Media Controller (DMC) to play back contents
from DLNA server on the Renderer (this unit).
Possible applications:
Renderer
Controller
Renderer
* DMC compatible software should be installed.
Preparation
Perform steps 1 and 2. (
3 Add the contents and folder to the libraries of
the Windows Media
smartphone, etc.
≥ Playlist of Windows Media
back only the contents that are stored in the
libraries.
4 Perform the "Remote Device Settings".
( 34)
≥ With the default setting, the unit name will
be displayed in the following;
DMP-BDT330/5
[BDT330]
DMP-BDT230/3/4/5
[BDT230]
DMP-BDT130/1
[BDT130]
≥ You can register up to 16 devices.
26
VQT4V74
Server
*
Server
i
Controller
25)
Player or the
®
Player can play
®
1
Press [HOME].
2
Select "Network".
3
Select "Home Network".
4
Select "Media Renderer".
5
[BDT330] [BDT230] Select "Home Network" or
"Wi-Fi Direct" and press [OK], then follow
the indications on the screen.
6
Operate the DMC compatible devices.
To exit from Media Renderer screen
*
Press [HOME].
About DLNA and Media Renderer
For more details, refer to the following website and the
operating instructions for each of the equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ [BDT330] [BDT230] Wi-Fi Direct connection while using
Home Network feature is only temporary, and the network
connection method returns to the original setting when
*
exiting.
≥ Depending on the device or connection environment, the
data transfer rate may decrease.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in grey on the display cannot be played
back by this unit.
≥ This unit can be played back via connected equipment only
when controlled using DMC.