Table of Contents
Advertisement
2nd
3rd
Input Port Ver.
Auto Source Switch+
Panel Care
Pixel Shift
Logo Brightness
Key Repeat Time
Description
Select an HDMI version.
(1.4
/ 2.0↑)
― The supportable device and resolution may differ depending on its version.
― When the version is changed, the screen may blink.
― If you set the
HDMI Mode
to 1.4, some high resolutions may not be supported because of bandwidth limitation of the HDMI 1.4 protocol.
― When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the device.
― Set
HDMI Mode
to
1.4
if the monitor is connected to an HDMI device and the monitor does not display the screen properly, displays a blank screen, or does
not play sound at all.
By activating, a new connected source is displayed automatically.
― This feature is available only when the monitor is turned on. (S49CG93*S model only.)
Adjusts settings to protect the screen.
― S49CG93*S model only.
Moves pixels at regular intervals to prevent screen issues.
― When the
Pixel Shift
mode is used, some of the screen edges may move outside the screen borders and may not be visible. To fix the screen at the home
position, turn off the
Pixel Shift
mode.
― To prevent afterimage when viewing content with a lot of static images, turn on the
Prevents screen issues by lowering the brightness of fixed images, such as logos and banners.
Control the response rate of a button when the button is pressed.
Acceleration,
1
sec, or
2 sec
can be selected. If
Pixel Shift
No Repeat
is selected, a command responds only once when a button is pressed.
mode.
38
Advertisement
Table of Contents
