Table of Contents
Advertisement
Setting the time
Make sure that the
watch is not wet
before operating the
crown.
0
1
20
1
Pull the crown out to position
hand points to 0 seconds.
The watch stops and the power reserve indication
hand moves to the reference position.
2
Rotate the crown to set the time.
• Pay attention to whether the time set is AM or PM.
• Date indication starts to change as the setting passes
10PM. Rotating the crown counter-clockwise does
not turn back the date indication.
3
Push the crown in to position in
with a reliable time source to finish the
procedure.
2
as the second
accordance
Advertisement
Table of Contents
