Table of Contents
Advertisement
7.
Black Boost: This boosts the amplitude of the dark color levels of the display-blacks will
be less black.The higher the level,the higher the boost.
8.
Low Blue Light: Low Blue Light: Filter out blue light to protect your eyes by adjusting
how much blue light is shown--Level 1,2,3,4.
-----------------------------------------------------------------------------------------------------------
Note: A lower level allows more blue light to pass through, so inorder to achieve
the best protection, please select a higher level, of which Level 4 is in the best state
9.
ACM: Turn ACM on or off. The default is off.
10.
HDR: Turn HDR off or Auto. The default is off.Select Auto enables this function to
automatically detect and process HDR signal.
-----------------------------------------------------------------------------------------------------------
Note:
1. HDR=(Auto ), The source signal content is SDR, the brightness can to
adjustment, but content is HDR the brightness is fixed at 100 and gray out.
2. HDR = (Auto ), features: (ACM/Gamma/Contrast/BlueLight/Color Temp/Black
Boost/6-axis Hue & Saturate/FreeSync) is gray out and unavailable, default
parameter please refer to "Modes".
3. HDR = (Auto ), Color Page only shows the adjustable function, other functions
(Gamma and Color Temp are hidden).
11. Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology
can simulate high-resolution images by boosting the pixel density of the original source
to make images sharper and clearer.
12. Max Brightness:Default is off.
-----------------------------------------------------------------------------------------------------------
Note: Due to environmental considerations,the default brightness of the display
will be low. It can be adjusted to your preferences with the following steps:
step1:Go to OSD menu> picture > Max Brightness, and turn Off to On to increase
the brightnesS.
step2: Once Max Brightness is turned on,adjust Brightness value between 0-100 to
your preference.
Adjusting the Color
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to adjust the sliding scales.
4.
Gamma mode allows you to adjust the luminance tone.The default value is 2.2
(standard value for Windows).
5.
Color temperature: Default is warm. You can choose Cool, Normal, Warm, Bluelight or
User.
6.
Modes: Select your preferred mode from Action, Racing, Sports, User, Standard,
ECo,Graphics and HDR
7.
Color Space: You can choose Standard,SMPTE-C,DCI,EBU,HDR,Rec.709 or sRGB.
11
Advertisement
Table of Contents
