MSD Manual
2.0 General Information
Nameplate Data
Figure 3 shows an example of a MotorShield
nameplate. The following information is marked on
™
the nameplate:
Part number: encoded model number explained on the following page
FLA: the rated continuous operating current (RMS amps)
System Voltage: the maximum VFD output voltage (fundamental)
Hz: the maximum VFD output frequency (fundamental)
Phase: 3 – The MotorShield
is designed for use only with 3-phase loads.
™
Drawing and Schematic #: outline and mounting dimension of filter with schematic diagram
Manufacturing #: for TCI internal use
Enclosure Type: UL Type 1 / 3R
Figure 3 – Example of MotorShield
Nameplate
™
8