Deck Mechanism Disassembly; Main Base; Clamp Assembly Disc; Plate Clamp - LG DKC880 Manual

DECK MECHANISM DISASSEMBLY

DISC CLAMP ASSEMBLY

PLATE CLAMP

MAGNET CLAMP

CLAMP UPPER

1. Main Base (Fig. 4-1)

1-1. Clamp Assembly Disc

1) Place the Clamp Assembly Disc as Fig. (A)
2) Lift up the Clamp Assembly Disc in direction of
arrow(A).
3) Separate the Clamp Assembly Disc from the Holder
Clamp.
1-1-1. Plate Clamp
1) Turn the Plate Clamp to counterclockwise direction and
then lift up the Plate Clamp.
1-1-2. Magnet Clamp
1-1-3. Clamp Upper

MAIN BASE

(Fig. A)
HOLDER
BASE MAIN
Fig. 4-1

TRAY DISC

BASE MAIN
BASE MAIN
BOTTOM SIDE VIEW
2. Tray Disc (Fig. 4-2)
1) Insert and push a Driver in the emergency eject
hole(A) at the right side, or put the Driver on the
Lever(B) of the Gear Emergency and pull the Lever(B)
in direction of arrow so that the Tray Disc is ejected
about 15~20mm.
2) Pull the Tray Disc until it is separated from the Base
Main completely.
4-2
LEVER
Fig. 4-2