Download Print this page

Braun 8391cc Manual page 33

Hide thumbs Also See for 8391cc:

Advertisement

Tips for a perfect shave
1. Position the shaver at the right angle (90°) to your skin.
2. Stretch your skin slightly with your hand.
3. Shave against the direction of your beard growth.
Multi Head Lock switch (head lock)
The shaver head can be locked in five positions to shave hard-to-reach areas
(e.g. under the nose).
• Slide the Multi Head Lock switch (3) down to lock the shaver head.
• Move the shaver head manually to your desired position.
• For automatic cleaning in the Clean & Charge Station the head lock needs to be
released.
Precision trimmer
The trimmer can be used to trim sideburns, moustache or beard.
• Press the release button (8) and slide the trimmer (6) upwards.
Travel lock
The shaver can be locked to avoid unintended starting of the motor (e.g. for storing in
a suitcase).
• Press the on / off button (4) for 5 seconds to lock / unlock the shaver. This is
confirmed by a beep sound and the lock icon appearing / disappearing on the
display.
Foil replacement
To maintain 100% shaving performance, replace the Foil & Cutter cassette (1), when
the foil replacement indicator lights up (and no status segments are visible).
• To remove the Foil & Cutter cassette press the release button (2).
• Press the on / off button for 10 seconds to reset the counter.
• Afterwards you need to unlock the shaver (see chapter «Travel lock»).
• On some shaver models the replacement indicator will reset automatically after
7 shaves.
Cleaning
Cleaning under running water
Especially important after foam or gel usage
• Switch on the shaver cordless and rinse the shaver head under hot running
water until all residues have been removed. You may use liquid soap without
abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.
• Next, switch off the shaver, press the release button (2) to remove the Foil & Cutter
cassette (1) and let it dry.
• If you regularly clean the shaver under water, apply a drop of light machine oil on top
of the Foil & Cutter cassette once a week.
The shaver needs to be cleaned under running water after each foam or gel
usage!
33

Advertisement

loading