Asus TUF Z270 MARK 1 Bios Manual page 56

ASST Fan Profile
This item allows you to set the appropriate performance level of the ASST Fan.
[Standard]
[Silent]
[Turbo]
[Manual]
Ext. Fan(s) Configuration
ASUS FAN EXTENSION CARD is required to configure these items
Extension Fan 1-3 Q-Fan Control
[Disabled]
[DC mode]
[PWM mode]
Extension Fan 1-3 Q-Fan Source
The assignment fan will be controlled according to the selected temperature source.
Configuration options: [CPU] [MotherBoard] [PCIEX16_1 Slot] [PCIEX16_3 Slot]
[VRM] [PCH] [T_SENSOR1] [EXT_Sensor1] [EXT_Sensor2] [EXT_Sensor3] [Multiple
Sources]
For EXT_Sensor1-3, connect a Thermistor cable to the EXT_TS1-3 header then place the
other end to the component to get the temperature.
Extension Fan 1-3 Fan Speed Low Limit
This item allows you to disable or set the extension fan warning speed.
Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
Extension Fan 1-3 Profile
This item allows you to set the appropriate performance level of the extension fan.
[Standard]
[Silent]
[Turbo]
[Manual]
56
Sets to [Standard] to make the chassis fan automatically adjust
depending on the chassis temperature.
Sets to [Silent] to minimize the fan speed for quiet chassis fan
operation.
Sets to [Turbo] to achieve maximum chassis fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
Disable the Extension Fan Q-Fan control feature.
Enable the Extension Fan Q-Fan control in DC mode for 3-pin
extension fan.
Enable the Extension Fan Q-Fan control in PWM mode for 4-pin
extension fan.
Set to make the extension fan adjust automatically depending on the
CPU temperature.
Set to minimize the fan speed for quiet extension fan operation.
Set to achieve maximum extension fan speed.
Set to assign the detailed fan speed control parameters.
ASUS TUF Z270 MARK 1 BIOS Manual