Connecting External Data Media; Settings For Usb Recording - Grundig 46 VLE 8220 BF Manual

usB­reCorDinG
Connecting­external­data­media­
notes:
Before connecting the data medium, switch
7
the television to standby with »
the device and then switch the television on
again.
Before removing the external data medium,
7
the television must be switched to standby,
so that no data loss occurs.
Your television features two USB sockets,
7
»usB1« and »usB2«.
»usB1« is used to connect data m edia,
which require an additional power supply
– for example, external hard disks.
1 Connect the »usB1« socket of the t elevision
and the corresponding socket of the data
medium (external hard disk) using a USB ca-
ble;
or
insert the USB plug of the USB memory stick
into the »usB2« socket of the television.
2 Confirm the display »
(green).
– T he file browser appears.
­ - -------------------------------------------------------------------------------------------------------------
notes:
7
8 «. Connect
7
7
settings­for­usB­recording
selecting­the­menu
1 Open the menu with »
2 Select the line »USB RECORDING« with
« with » «

The »usB2« socket of the television sup-
plies a maximum power of 500 mA in ac-
cordance with USB specifications. External
hard disks which require more power may
therefore only be connected to the »usB1«
of the television.
If you use a network cable for external hard
disks which have been connected to the
»usB1« socket of the television, this network
cable must also be disconnected from the
power supply when the television is switched
off.
External data media may not be disconnect-
ed from the television while files on the data
medium are being accessed.
» « or » « and press »oK« to confirm.
v Λ
– T he »USB RECORDING« menu appears.
USB RECORDING
PRnP
Auto Preview
Manage data medium
Safely Remove Disk
Disk
Partition
Capacity Used
Used (MB)
Total (MB)
Remaining SD recording time
Remaining HD recording time
Exit
Back
menu
«.
20.09.2010
15:46
OK
On
USB
C:
%3
1249
38145
1,008 min
288 min
­ 2 5
ENGLISH