Advertisement
ADDING A FULL-RANGE AMP & SUB TO A FACTORY SYSTEM
Bass Knob
Factory Amp
If equipped, bypass
and remove
Black - Ground
Orange - Control
Factory Radio Harness
Interface
4
Factory Radio
Any remaining wires
tape off and disregard
Vehicle T-Harness
Unplug connector
Interface Harness
Any remaining wires
tape off and disregard
RCA Jacks
(sold separately)
Assignable Outputs Labeled CH 6-10
White / Front Left +
Cut the male
White/Black / Front Left -
connector off and
Gray / Front Right +
connect speaker
Gray/Black Front Right -
Green / Rear Left +
wires to amp
Green/Black / Rear Left -
(non-amplified
Purple / Rear Right +
models only)
Purple/Black / Rear Right -
Blue/White - Amp Turn-On Wire
An SPDT relay, Metra part number
E-123, is required if the amp turn-on
current of all amps exceeds 1-amp.
Advertisement
