Step 1; Step 2 - modway EEI-4671 Manual

EEI-4671, 4672 CHAIR

STEP 1:

1. Remove the hardware bag from the Chair Base (2) package.
2. Please put Chair Body (1) upside down on a carpeted or padded surface.
3. Put Chair Base (2) on the Chair Body (1) as shown.
4. Insert 4 pieces of Bolts (A) with 4 pieces of Spring Washers (B) and 4 pieces of Flat Washers (C) from the
pre-drilled holes on Chair Base (2) into the Chair Body (1) as shown.
(Note: the wider side is the front of the chair body, the narrower side is the back of the chair body.)
5. Use Allen Wrench (D) to tighten all Bolts (A) clockwise until secure.

STEP 2:

Carefully turn over the assembled chair.
Assembly is complete. Your chair is ready to enjoy now!
Customer Service 609-256-9000︱www.modway.com
Page 2 of 2