HighSecLabs SX42PH-4 User Manual page 8

SECTIONS
Table of Contents
INSTALLATIoN
Step 2 – Power ON the Mini-Matrix
1. Turn oN all the PCs.
2. Connect the power supply and power oN the
Mini-Matrix (approximate boot time is 10
seconds).
The Mini-Matrix boots into duplicate-mode,
where source number 1 is presented on
both displays.
Note: In case no picture is presented after powering oN, switch between the
primary and secondary displays, or connect an alternate display, or perform a
reset to factory default.
HSL Secure Mini-Matrix User Manual
1
Move mouse to switch PCs
Speakers
PC #1
Internet
Single
Keyboard & Mouse
3
2
PC #4
Top Secret
SECURE SECURE
MINI MATRIX MINI MATRIX
Multiple Sources
7