Shark Rotator Powered Lift-Away ZU620 Quick Start Manual

Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.
QUICK START GUIDE
WHAT'S INSIDE
A
Vacuum Pod
B Motorized Floor Nozzle
C Handle & Hose
ASSEMBLY
C
(Click)
A
(Click)
B
For additional parts and accessories,
visit sharkaccessories.com
ZU620_QSG_EB2_Mv1_191107
D Wand
E 8" Crevice Tool
F Upholstery Tool
E F
D
(Click)
Attach onboard
(Click)
accessories
(Connect)
with Self-Cleaning Brushroll
Slide hose clip
into back of wand
for convenience.
Empty the dust cup after each use.
The self-cleaning brushroll automatically
removes hair wrap. If some hair or debris
OR
remains after continued use, remove the
Locks
Using a coin, turn locks
counterclockwise to
open, then lift off cover
to access brushroll.
SPEED
POWERED
LIFT-AWAY
TIPS
For quick cord access,
rotate upper hook down
and remove cord.
To store your vacuum, wrap
cord around cord hooks.
MAINTENANCE
TIP:
Rinse foam and felt
filters every 3 months,
and HEPA filter every
year.
Rinse filters with water
only and allow them
to air-dry completely.
Tap loose dirt from
foam filters as needed
between washes.
Note: The foam filter
may discolor over time.
This is normal.
Self-Cleaning Brushroll
cover to access the brushroll.
Clear blockages
from airway.
®
Replace cover,
pressing down
firmly on all sides
before turning locks
clockwise to close.