Table of Contents
Advertisement
The grounding cable should be selected according to the current. All devices connected to
the AVR must be grounded. Devices without grounding or with untested grounding are
dangerous for the user and may cause malfunction of the electronic control board. Using
the wrong diameter grounding cable can be dangerous for users and device.
Connecting to generator:
The output power of the generator must be higher than the rated power of the AVR. The
frequency of the generator should be in the range of 45 - 65 Hz, and the form of the voltage
at the output should be Pure sine wave. If these conditions are not met, the stabilizer and
generator may not work correctly.
Technical support: www.real-el.com
WARNING!
High voltage inside which can cause electric shock.
Advertisement
Table of Contents
