Changing The Basic Set- Tings; Programme Counter; Calling Up The Programme Counter; Cleaning And Servicing - Siemens WG44B2070 User Manual And Installation Instructions

Table of Contents

Advertisement

en Programme counter
16.2 Changing the basic set-
tings
Requirement: The display shows all
additional buttons.
→ "Displaying or hiding additional but-
tons", Page 19
To call up the basic settings, press
1.
Einstellungen .
Select the required basic setting.
2.
→ "Overview of the basic settings",
Page 39
Adjust the basic setting:
3.
To change the value, press
or
.
To reset the appliance to the
factory settings, press and hold
⁠  
for approx. 3 seconds.
Press Einstellungen to save the
4.
settings.

Programme counter

17 Programme counter
The program counter displays the
Programme counter
number of finished programmes.
17.1 Calling up the pro-
gramme counter
Press Einstellungen .
1.
Set the programme to position 6.
2.
40

Cleaning and servicing

18 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
18.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
Select the Baumwolle 90°C pro-
gramme or the drum cleaning pro-
gramme in the Home Connect
app.
Run the programme without laun-
dry but with washing powder that
contains oxygen bleach or a a
cleaning agent for caring for the in-
side of the appliance.
→ "Accessories", Page 31
18.2 Cleaning the detergent
drawer
Pull out the detergent drawer.
1.

Advertisement

Table of Contents
loading

Table of Contents