Advanced Settings; Infrastructure Settings - TRENDnet TEW-445UB User Manual

108Mbps 802.11g High Power Wireless USB 2.0 Adapter

3.2.4 Advanced Settings

Click on the Advanced tab in the Profile Management section. Here you can
configure the wireless mode, power save mode, and network type.
3.2.4.1

Infrastructure Settings

Wireless Mode: Place a check in the preferred frequency and data rate.
Power Save Mode: Select Maximum, Normal, or Off from the drop-
down list.
recommended if using a laptop running on battery.
Network Type: Select Infrastructure from the dropdown list if the
wireless client is connecting to an access point.
802.11b Preamble: This setting should be the same as the access point.
If you are not sure of that setting, select Short & Long.
Preferred APs: Click on this button to add specific access points to this
profile. Then enter the MAC addresses of the specific access points and
then click OK to return to the previous window.
Selecting Maximum will save the most power. This is
46