Adjusting The Volume - Sony HVR-Z7U Operating Manual

To name the picture profile settings
You can name picture profile1 through 6.
1 Press the PICTURE PROFILE button
B.
2 Select the picture profile that you want
to name with the SEL/PUSH EXEC dial
A.
3 Select [SETTING] t [PROFILE
NAME] with the SEL/PUSH EXEC dial
A.
4 Select a letter with the SEL/PUSH
EXEC dial A. Repeat this operation
until a complete name is entered.
PICT. PROFILE
P I CTURE PROF I LE
z Tips
• Each name can be up to 12 characters long.
Characters that can be used in profile
names:
• A to Z
• 0 to 9
• - _ / # & : . @
5 Select [OK] with the SEL/PUSH EXEC
dial A.
The profile name is changed.
RETURN] t [OK] with
6 Select [
the SEL/PUSH EXEC dial A.
To copy the picture profile setting to
other picture profiles
1 Press the PICTURE PROFILE button
B.
2 Select the picture profile that you want
to copy from with the SEL/PUSH
EXEC dial A.
3 Select [SETTING] t [COPY] with
SEL/PUSH EXEC dial A.
CANCEL
OK
END
4 Select the number of the picture profile
that you want to copy to with the SEL/
PUSH EXEC dial A.
5 Select [YES] with the SEL/PUSH
EXEC dial A.
RETURN] t [OK] with the
6 Select [
SEL/PUSH EXEC dial A.
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
1 Press the PICTURE PROFILE button
B.
2 Select the number of the picture profile
that you want to reset with the SEL/
PUSH EXEC dial A.
3 Select [SETTING] t [RESET] t
[YES] t [ RETURN] t [OK]
with the SEL/PUSH EXEC dial A.

Adjusting the volume

You can adjust the volume of a microphone
connected to the INPUT1/INPUT2 jack.
z Tips
• See page 12 for details on attaching the supplied
microphone and on the REC CH SELECT
switch.
A
INPUT2 INPUT1
LINE LINE
MIC MIC
MIC MIC
B
Continued ,
41