Advertisement
7. The end of the wash cycle is indicated by beeps and by the flashing of the indictor light of the selected wash cycle.
Open the door, switch off the appliance by pressing the On/Off button.
8. Wait a few minutes before removing the crockery in order to avoid burns.
Changing a wash cycle in progress
If a mistake was made in the wash cycle selection process, it is possible to change the cycle provided that it has only
just begun: open the door, taking care to avoid the escaping steam, and press and hold the On/Off button; the machine
will switch off. Switch the machine back on using the On/Off button and select the new wash cycle and any options
desired; start the cycle by closing the door.
Adding extra crockery
Without switching off the machine, open the door, taking care to avoid the escaping steam, and place the crockery
inside the dishwasher. Close the door, the cycle starts from the point at which it was interrupted.
Accidental interruptions
If the door is opened during the wash cycle or there is a power cut, the cycle stops. It starts again from the point at
which it was interrupted once the door has been shut or the electricity supply restored.
Advertisement
