Mixer Control Panel - ICON iKeyboard3S Instructions Manual

Mixer control panel

On the mixer control panel, there are four different main types of ASIO channels that
you can manipulate.
1. iKeyboardS Hardware channels (HW In 1/2 & HW Out 1/2)

These are the hardware input and output channels on iKeyboardS.
2. iKeyboardS Virtual channels (VC In 1/2, 3/4 and 5/6), (VC Out 1/2, 3/4
and 5/6)

These are the input and output virtual channels that related to the WDM.

For example: WDM Out 1/2 linked to VC In1/2


3. iKeyboardS Loopback channels (LB 1/2, 3/4 and 5/6)

These are the ASIO loop-back channels.
1
3
4
5
9
10
11
2
14
Diagram 19

By activating different cross points, you may route the corresponding signal to your
desired channels.
1. HW Input 1/2 level metering

Showing the hardware 1/2 input level (HW In 1/2).
2. HW Output 1/2 level metering

Showing the hardware 1/2 output level (HW Out 1/2).
VC Out1/2 linked to WDM In1/2
Ⅲ
6 7 8 9
11
10
16
15
12
13
19