Mixer Control Panel - ICON iKeyboard3S Instructions Manual

Mixer control panel

The mixers work like a matrix mixer. Activate and adjust the corresponding input or output
channel level. They are very useful and make your inputs and outputs very flexible. You may
route any of your input(s) to any output(s).
1
2
5
Diagram 5
1. HW Input 1/2 level metering

Showing the hardware 1/2 input level. (HW In 1/2).
2. HW Output 1/2 level metering

Showing the hardware 1/2 output level.(HW Out 1/2).
3. Link switch

Switch to adjust both channels level simultaneously.
4. Mute switch

Switch to mute the corresponding channel.
5. "0dB" switch

Switch to instantly adjust the corresponding channel to "0dB" level.
6. Gain control fader

Slide to adjust the gain level for the corresponding channel.
7. Inputs & Outputs Matrix switches

Switch to turn On/Off the corresponding input channel route to the corresponding output
channel. The matrix is very useful and makes your inputs and outputs very flexible. You may
route any of your input(s) to any output(s).
14
Ⅲ
7
6
3
4