3. Secure the VPC-A31-O1 to the display with the two (2) included screws.
NOTE:
• Please note that the three (3) antennas must be installed on the VPC-
A31-O1.
• Please pay attention to the installation direction of the VPC-A31-O1, with
the vents facing outwards to avoid damage.
• The VPC-A31-O1 does not support hot swapping. When removing the
device, turn off the power supply for both the display and VPC-A31-O1 first.
Handles/Vents
Side View
Figure 1
9
Vents
450 View