Komatsu GALEO PC1250-8 Operation & Maintenance Manual page 120

OPERATION
Controls of Radio
Method of Setting with Preset Button
1. Press power switch (1) and display the frequency on display
(7).
2. Use tuning button (9) to set to the desired frequency. There are
two methods for tuning: auto tuning and manual tuning.
3. With the display (7) showing the desired frequency, keep the
desired Preset button No pressed for at least 1.5 seconds. The
reception sound will disappear, but when the presetting
operation (saving to memory) is completed, the sound will
appear again and the Preset No and frequency will be shown
on the display to show that the presetting operation has been
completed.
After completing the presetting, press Preset button (6) and
release it within approx. 1.5 seconds. This will make it possible
to receive the channel preset to that button. One channel each
for AM and FM can be preset to each Preset button.
REMARK
It is also possible to save to the Preset button by using the auto
store button.
Method of Tuning
1. Press power switch (1) and display the frequency on display (7).
2. Use tuning button (9) to set to the desired frequency. There are two methods for tuning: auto tuning and manual
tuning.
Manual tuning
Press tuning button (9) until the frequency is displayed on display (7).
< button: Frequency moves down
> button: Frequency moves up
When the frequency reaches the top or bottom frequency, it automatically continues as follows: Top ! Bottom, or
Bottom ! Top.
Auto tuning
Press tuning button (9) for at least 3 seconds. When a station is picked up, the tuning automatically stops. To
search for the next station, press the tuning button again for at least 3 seconds.
< button: Frequency moves down
> button: Frequency moves up
If this button is pressed during auto tuning, the auto tuning will be cancelled and the setting will return to the
frequency in use before the button was pressed.
DETAILED CONTROLS AND GAUGES
3 - 63