Download Print this page

SRC T-XRX-07-01-SL Manual

Gps bar for triumph tiger800 xrx

Advertisement

Quick Links

Scope of Supply/Bill of Material & Mounting Drawings
Part Number: T-XRX-07-01-SL / T-XRX-07-02
Part Description: GPS BAR – TRIUMPH TIGER800 XRX
Applicable to Finished colour versions of Black and Silver
Installation / Parts List / Bill of Material for Mounting
No. Description
1
RH Bracket
2
End Adaptor
3
GPS Bar
4
LH Bracket
5
Washer M8
6
Screw M8 x 16
SRC Design uses Metric System of Measurement and all dimensions are in Millimeters
* Recommended to use the Torque specified in the table
** Denotes Usage of Liquid Thread Locker in specified locations
Copyright By SRC
Design and Specification are subjected to change
Quantity Torque * (N-m) Remarks **
1
2
1
1
2
2
9 - 10
Use Liquid Thread Locker
Page 1

Advertisement

loading

Summary of Contents for SRC T-XRX-07-01-SL

  • Page 1 9 - 10 Use Liquid Thread Locker SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
  • Page 2: Mounting Drawings

    MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
  • Page 3: Mounting Instructions

    GPS Bracketry. Step 2: Unscrew the 2 off Button Head screws, as shown, and keep them aside. SRC’s GPS Bracketry will be mounted/fitted using the above screws. Step 3: Under the Speedo console, unscrew the 2 off Button head screws, as shown.
  • Page 4 Slip-in 1 off Button head screw and secure the threads. The LH and RH GPS Brackets in “As is mounted condition” is as shown in the drawing to the right. Copyright By SRC Design and Specification are subjected to change Page 4...
  • Page 5 Follow the step 6, for mounting the RH Bracket and secure the threads The LH and RH Brackets, are as shown in the drawing on the left, in “As is mounted condition”. Copyright By SRC Design and Specification are subjected to change Page 5...
  • Page 6 16 (6) – 1 off from each side of the bracket and fully tighten the GPS bar, as shown. The GPS Bar in final mounted condition is as shown. Copyright By SRC Design and Specification are subjected to change Page 6...
  • Page 7: General Instructions

    Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.

This manual is also suitable for:

T-xrx-07-02