:
Warning
Risk of electric shock/material
damage/damage to the
appliance!
If moisture penetrates the
appliance, this may cause it to
short circuit.
Do not use a pressure washer,
steam cleaner, hose or spray
gun to clean your appliance.
:
Warning
Risk of injury/material
damage/damage to the
appliance!
The use of spare parts and
accessories supplied by other
brands is dangerous and may
result in injury, material damage
or damage to the appliance.
For safety reasons, use
genuine spare parts and
accessories only.
Caution!
Material damage/damage to
the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain
removers, prewash sprays, etc.)
may cause damage if they
come into contact with the
surfaces of the appliance.
Therefore please note:
Do not allow these agents to
■
come into contact with the
surfaces of the appliance.
Clean the appliance with
■
nothing but water and a soft,
damp cloth.
Remove any detergent,
■
spray or other residues
immediately.
Environmental protection
7
Environmental
protection
P ackaging/used appliance
E n v i r o n m e n t a l p r o t e c t i o n
Dispose of packaging in an
)
environmentally-responsible
manner.
This appliance is labelled in
accordance with European
Directive 2012/19/EU
concerning used electrical and
electronic appliances (waste
electrical and electronic
equipment - WEEE).
The guideline determines the
framework for the return and
recycling of used appliances
as applicable throughout the
EU.
Tips on economical use
Always fill the appliance with the
■
maximum amount of laundry for
each programme. ~ Page 27
Wash normally soiled laundry
■
without pretreating.
For light and normal soiling in
■
laundry, you can save energy and
detergent.
The selectable temperatures apply
■
to the care labels on the textiles. The
temperatures in the appliance may
deviate from this so that you get the
optimum mix of energy-saving and
washing results.
Sleep mode: If the appliance is not
■
operated for a prolonged period
(approx. 5 minutes), the display
panel lighting goes out before the
programme starts and after the
programme has ended, # flashes.
Touch any area of display panel to
activate the display backlighting.
When the programme is running,
most of the display panel lighting
goes out. Touch any area of display
panel to re-activate the lighting.
en
11