Related Manuals for Sony WEGA KV-LS212
Summary of Contents for Sony WEGA KV-LS212
- Page 1 3-269-697-11 (1) Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-LS212 © 2007 Sony Corporation...
- Page 2 Specifications KV- LS212M90 Note Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K, M Color system PAL, PAL 60, SECAM, NTSC3.58, NTSC4.43 NICAM Stereo/Bilingual B/G, I, D/K; Stereo/Bilingual system A2 Stereo/Bilingual B/G Channel coverage...
- Page 3 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
-
Page 4: Getting Started
Getting Started Step 1 Insert the batteries (supplied) into the remote. • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •... - Page 5 Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You can adjust settings below using the buttons on the remote control or TV front panel. Press V, v, B or b to select or adjust items, then press Select the desired menu language.
-
Page 6: Connecting Optional Components
Connecting optional components You can connect a wide range of optional components to your TV. Connecting cables are not supplied. Connecting to the TV (front) Audio/Video Camcorder cable (MONO) SOUND MODE PROG L(MONO) Headphones Connecting to the TV (rear) TV, CATV, Satellite Antenna cable (MONO) -
Page 7: Tv Buttons And Remote Control
TV buttons and remote control Turn off or turn on the TV. Remote control sensor. Wake Up indicator. Standby indicator. PROG +/– Select program number. 2 +/– Adjust volume. SOUND PROG Select TV or video input. MODE L(MONO) WEGA GATE menu operations (see I) Select or adjust items. - Page 8 TV buttons and remote control (continued) Select TV or video input. Input numbers. For program numbers 10 and above, enter the next digit within two seconds. Select sound mode options with a 5-Band Graphic Equalizer display: “Dynamic”, “Standard”, “Custom”* (see K). Custom Dynamic Standard...
-
Page 9: Listening To The Fm Radio
Listening to the FM Radio You are able to listen to the FM radio stations using your TV by connecting an antenna (see E). To access to FM Radio mode: Press WEGA GATE button and select “FM Radio” (see I). Press FM button on the front panel (see F). -
Page 10: Troubleshooting
• Count the number of times the 1 (standby) indicator flashes. Press 1 on the TV to turn it off, disconnect the AC power cord and inform your dealer or Sony service center of how the indicator flashes (duration and interval). -
Page 11: Wega Gate Navigator
WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs, FM Radio mode and “Settings” menu. WEGA GATE “TV” External Inputs watch the preset TV FM Radio channels (see D) Settings Select Confirm Select... -
Page 12: Picture Setting
“Picture” setting Press WEGA GATE and select “Settings”. Picture Make sure the “Picture” icon ( ) is selected, Picture Mode: Vivid Picture Adjustment then press Color Temperature: Cool High Intelligent Picture: Signal Level Indicator: Select Confirm “Picture Mode” Choose either “Vivid” (bright, contrast and sharp), “Standard”... -
Page 13: Sound Setting
“Sound” setting Press WEGA GATE and select “Settings”. Sound Press V or v to select the “Sound” icon ( ), Sound Mode: Dynamic Sound Adjustment then press Balance Intelligent Volume: Surround: Select Confirm “Sound Mode” Choose either “Dynamic” (low and high tones), “Standard” (voice and high tones) or “Custom”*. -
Page 14: "Channel Setup" Setting
“Channel Setup” setting Press WEGA GATE and select “Settings”. Channel Setup Auto Program Press V or v to select the “Channel Setup” Manual Program Program Sorting/Edit icon ( ), then press FM Radio Setup Select Confirm “Auto Program” Preset channels automatically. “Manual Program”... - Page 15 “Channel Setup” setting (continued) “FM Radio Setup”* Preset up to nine FM radio stations. You can manually preset each FM radio station that can be received in your area and then store the radio frequency of the desired FM radio stations. (1) Press V or v to select the desired FM radio station position, then press (2) Press V or v to search the FM radio stations.
- Page 16 “Channel Setup” setting (continued) Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. (1) Make sure “Program” is selected, then press (2) Press V or v until the program number you want to preset appears on the menu, then press Select the desired channel.
- Page 17 “Setup” setting Press WEGA GATE and select “Settings”. Setup Language: English Press V or v to select the “Setup” icon ( Video Label Color System: Auto then press Wake Up Timer Beep: Factory Settings Select Confirm “Language” Change the menu language. Press V or v to select either “English”...