Table of Contents
Advertisement
Suunto Traverse Alpha
3.21.1. Navigating a route
You can navigate a route you have transferred to your Suunto Traverse Alpha from
Movescount (see 3.21. Routes) or from a log in your logbook with GPS data. You get a preview
of the route based on the route list or logbook selection.
If you are using the compass for the first time, you need to calibrate it (see 3.6.1. Calibrating
compass). After activating the compass, the watch will begin searching for a GPS signal. After
the watch acquires a GPS signal, you can begin to navigate a route.
To navigate a route:
1. Press [START] to enter the start menu.
2. Scroll to NAVIGATION with [START] and press [NEXT] .
3. Scroll to Routes or NAVIGATION and press [NEXT] to enter .
4. Scroll to the route you want to navigate with [START] or [LIGHT] and press [NEXT] .
5. Press [NEXT] to select Navigate. All navigating is recorded. If you watch has more than
one sport mode, you are prompted to select one.
6. Select Forwards or Backwards to chose the direction you want to navigate (from the first
waypoint or the last).
Forwards
Direction
Backwards
7. Start navigating. The watch informs you when you are approaching the beginning of the
route.
10 km
8. The watch informs you when you have arrived at your destination.
TIP: You can also start navigating while recording an activity (see 3.19. Recording
activities).
3.21.2. During navigation
During navigation, press [VIEW] to scroll the following views:
full track view showing the whole route
•
zoomed-in track view of the route: by default, the zoomed-in view is scaled to a 100 m (0.1
•
mi) scale; the scale is larger if you are far away from the route
Track view
The full track view shows you the following information:
Approaching
BEGIN
10 km
29
Advertisement
Table of Contents
