Table of Contents
Advertisement
Quick Links
Quick Start Guide
Includes:
1. Touch device
2. USB Cable
3. Charging Cradle
4. TOCHGM0006
Instructions:
1. Open Charging Cradle.
2. Line up charging pins of the Touch with pins of Charging Cradle.
3. Set Touch into Charging Cradle so that pins of the device and pins of the
cradle are in contact.
4. Close the Charging Cradle. You will hear a click.
5. Plug the small end of USB Cable into Charging Cradle.
6. Plug the large end of the USB Cable into a compatible USB socket.
7. Allow Touch device to charge for at least 90 minutes.
Model: TOCHGM0006
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment under FCC rules. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation of
the device. FCC RF Radiation Exposure Statement: This equipment complies with
FCC radiation exposure limits set forth for an uncontrolled environment. End users
Advertisement
Table of Contents
Related Manuals for Striiv TOCHGM0006
Summary of Contents for Striiv TOCHGM0006
- Page 1 Includes: 1. Touch device 2. USB Cable 3. Charging Cradle 4. TOCHGM0006 Instructions: 1. Open Charging Cradle. 2. Line up charging pins of the Touch with pins of Charging Cradle. 3. Set Touch into Charging Cradle so that pins of the device and pins of the cradle are in contact.
- Page 2 must follow the specific operating instructions for satisfying RF exposure compliance. This device must not be co-located or operated in conjunction with any other antenna or transmitter instructions for satisfying RF exposure compliance. NOTE: Operating temperature ranges from -4°F to 149°F (-20°C to 65°C). Relative humidity ranges from 0% to 93% RH.
- Page 3 Customer’s cost, to YF or YF designated third party facility for repair or replacement. Before Customer ships Customer’s Product to YF for warranty service. Customer is responsible for making a separate backup copy of the contents of the Product. THE CONTENTS OF THE PRODUCT MAY BE DELETED AND THE STORAGE MEDIA REFORMATTED IN THE COURSE OF WARRANTY SERVICE.
- Page 4 5. Limitation of Liability. IN NO EVENT WILL YF BE LIABLE FOR ANY CONSEQUENTIAL, EXEMPLARY, SPECIAL, OR INCIDENTAL DAMAGES, INCLUDING ANY DAMAGES FOR LOST DATA OR LOST PROFITS, ARISING FROM OR RELATING TO THIS LIMITED WARRANTY OR THE PRODUCTS, EVEN IF YF KNEW OR SHOULD HAVE KNOWN OF THE POSSIBILITY OF SUCH DAMAGES.
Need help?
Do you have a question about the TOCHGM0006 and is the answer not in the manual?
Questions and answers