Table of Contents
Advertisement
Quick Links
Striiv Touch Quick Start Guide
Includes:
1. Striiv Touch device
2. USB Cable
3. Charging Cradle
4. Quick Start Guide
Instructions:
1. Open Charging Cradle.
2. Line up charging pins of the Striiv Touch with pins of Charging Cradle.
3. Set Striiv Touch into Charging Cradle so that pins of the device and pins of
the cradle are in contact.
4. Close the Charging Cradle. You will hear a click.
5. Plug the small end of USB Cable into Charging Cradle.
6. Plug the large end of the USB Cable into a compatible USB socket.
7. Allow Striiv Touch device to charge for at least 90 minutes.
8. Visit
www.striiv.com/setup
FCC Statement
Model: W100
FCC ID: HLZW100
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment under FCC rules. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation of
the device. FCC RF Radiation Exposure Statement: This equipment complies with
to complete the setup of your device.
Advertisement
Table of Contents
Related Manuals for Striiv Touch W100
Summary of Contents for Striiv Touch W100
- Page 1 1. Open Charging Cradle. 2. Line up charging pins of the Striiv Touch with pins of Charging Cradle. 3. Set Striiv Touch into Charging Cradle so that pins of the device and pins of the cradle are in contact. 4. Close the Charging Cradle. You will hear a click.
- Page 2 United States and other countries. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Striiv, Inc. is under license. All other brands and product names are or may be trademarks of their respective owners.
- Page 3 Product, that the Product is subject to an Exclusion (defined below). Striiv will bear all costs of return shipping to Customer, except, if (i) the Product is subject to an Exclusion, or (ii) Customer’s return shipping address is not located in a country in which Striiv, or Striiv authorized reseller(s), distributes Products, then Customer will bear all shipping costs.
- Page 4 Striiv; or (j) any acts of God, including fire, flood, tornado, earthquake, hurricane, excessive snow, lightning; or (k) other disasters such as war, riot, or insurrection. 4. Disclaimers. EXCEPT TO THE EXTENT SET FORTH ABOVE IN THIS LIMITED WARRANTY, THE PRODUCTS ARE PROVIDED ON AN “AS IS”...
Need help?
Do you have a question about the Touch W100 and is the answer not in the manual?
Questions and answers