JVC KD-G420 Instructions Manual page 73

Indications
DEMO
Display demonstration
CLOCK H
Hour adjustment
CLOCK M
Minute adjustment
LEVEL
Audio level meter
DIMMER
Dimmer
SCROLL* 1
Scroll
EXT IN* 2
External input
AUX ADJ
Auxiliary input level
adjustment
TAG DISP
Tag display
AMP GAIN
Amplifier gain control
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* 1
* Displayed only when one of the following sources is selected—FM, AM, CD, or AUX IN.
2
Selectable settings, [reference page]
DEMO ON : [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [6].
DEMO OFF : Cancels.
1 – 12, [6]
[Initial: 1 (1:00)]
00 – 59, [6]
[Initial: 00 (1:00)]
ON : [Initial]; Activates the audio level indicator.
OFF : Cancels; sound mode indicator is shown.
AUTO : [Initial]; Dims the display when you turn on the
headlights.
ON : Activates dimmer.
OFF : Cancels.
: [Initial]; Scrolls the disc information once.
ONCE
: Repeats scrolling (5-second intervals in between).
AUTO
OFF : Cancels.
• Pressing D DISP for more than one second can scroll the display
regardless of the setting.
CHANGER : [Initial]; To use a JVC CD changer, [8], an Apple iPod or
a JVC D. player, [15].
EXT IN : To use another external component, [15].
A.ADJ 00 – A.ADJ 05: Adjust the auxiliary input level to avoid the
sudden increase of the output level when changing
the source from external component connected to the
AUX input jack on the control panel.
[Initial: A.ADJ 00]
TAG ON : [Initial]; Shows the ID3 tag while playing MP3/WMA
tracks, [10].
TAG OFF : Cancels.
You can change the maximum volume level of this unit.
LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power
of the speaker is less than 50 W to prevent them from
damaging the speaker.)
HIGH PWR : [Initial]; VOL 00 – VOL 50
13