Product Assembly; Attaching The Accessories; Product Usage; Operating The Speed Control - KitchenAid 5KHM5110 Owner's Manual

Hide thumbs Also See for 5KHM5110:

Table of Contents

PRODUCT ASSEMBLY

Wash all accessories in warm, soapy water before use. Be sure the Hand Mixer is unplugged

before cleaning, and putting on or taking off parts.

IMPORTANT: Be sure to read and follow the specific instructions in this manual for proper use

of the Hand Mixer.

Unplug the Hand Mixer from the electrical outlet.

NOTE: Paired accessories (Beaters, optional Dough Hooks) include one accessory with a

collar, and one without. Single accessories, like the Pro Whisk, come without a collar.

Insert the accessory shaft with the collar into the larger opening of the Hand Mixer. Align

the flanges on the shaft with the slots in the opening. Push to lock into place.

Insert the accessory without a collar into the smaller opening. Align and push to lock into

place.

NOTE: An accessory shaft without a collar may be used in either opening. Those with a

collar may only be used in the larger opening.

This KitchenAid Hand Mixer will beat faster and more thoroughly than most other electric hand

mixers. Therefore, the beating time in most recipes must be adjusted to avoid over beating.

Beating time is faster due to larger beater sizes.

To help determine the ideal beating time, observe the batter or dough and beat only until it has

the desired appearance described in your recipe, such as "smooth and creamy". To select the

best beating speeds, see the "Speed Control Guide" section of Online Product Guide.

WARNING

Injury Hazard

Unplug mixer before touching

beaters.

Failure to do so can result in broken

bones, cuts, or bruises.

Table of Contents