Advertisement
a
WARNING:
Failure
to follow
these
safety
precautions
may lead to a serious accident.
6. GENERAL
PRECAUTIONS
4
UNAUTHORISED
MODlFlCATlON
1
l
Any modification
made without authorisation
from Komatsu can create hazards.
l
Before making a modification,
consult your Komatsu distributor.
Komatsu
will not be responsible
for any
injury or damage caused by any unauthorised
modification.
ALWAYS APPLY LOCK WHEN LEAVING OPERATOR'S
SEAT 1
1
When standing up from the operator's seat, always place the safety lock lever securely in the LOCK position.
If you accidentally
touch the travel or swing lever when they are not locked, the work equipment
may sud-
denly move and cause serious injury or damage.
When leaving the machine,
lower the work equipment
completely
to the ground, set the safety lock lever to
the LOCK position, then stop the engine and use the key to lock all the equipment.
Always take the key with
you. Work equipment
posture See+
12.16 "PARKING
THE MACHINE."
4 MOUNTING
AND DISMOUNTING
]
NEVER jump on or off the machine. NEVER get on or off a moving machine.
When mounting or dismounting,
always face the machine and use the handrails,
machine or chassis steps.
Do not hold any control levers when getting on or off the machine.
Ensure safety by always maintaining
at least three-point
contact of hands and feet with the handrails,
steps
or wheels.
Always remove any oil or mud from the handrails, steps and wheels. If they are damaged,
repair them and
tighten any loose bolts.
If grasping the door handrail when mounting or dismounting
or moving on the chassis steps, open and lock
the door securely in the open position. Otherwise, the door may move suddenly, causing you to lose balance
and fall.
1-3
Advertisement
