Advertisement
Quick Links
SUMAKE
Specification:
Free Speed
Motor
Air Consumption
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
PNEUMATIC TOOLS
3" Flex-Head Cut Off Tool
W/ Wheel
ST-CT150
21,000 r/min
0.8HP
13 CFM (370 L/min)
9" (230mm)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
2.4lb (1.1kg)
Noise and Vibration:
Vibration
EN ISO 28927-4
Sound Pressure Level
Load:
3.7 m/s²
Uncertainty
²
K= 1.5 m/s
Noise
EN ISO 15744
Please always
No load: 87 dB(A)
protector at
Sound power level
environment
No load: 98 dB(A)
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
K= 3dB
ST-CT150-S-2102A-D5F
Remark
wear ear
hearing!
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sumake ST-CT150
Summary of Contents for Sumake ST-CT150
- Page 1 3/8” (10 mm) Air Hose (I.D.) dB(A) due to risk of impaired Air Pressure 90 psi (6.3 bar) Uncertainty Uncertainty hearing! ² K= 1.5 m/s K= 3dB Net Weight 2.4lb (1.1kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-CT150-S-2102A-D5F...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： 3" FLEX-HEAD CUT OFF TOOL W/ WHEEL Model/ Serial No.： ST-CT150 to which this declaration applies, complies with these normative documents: ... -
Page 3: Lubrication And Maintenance
SAE #10 oil and kerosene If outside conditions are in order, disconnect tool from hose. disassemble tool. replace worn or damaged parts, clean, reassemble and relubricate, or take tool to your nearest authorized service center ST-CT150-I-2102A-D5... -
Page 4: Parts List
ST-CT150 3" FLEX-HEAD CUT OFF TOOL W/ WHEEL PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty CT150-01 Hex. Bolt CT150-27 Spring Pin CT150-02 Washer CT150-28 Spacer CT150-03 Wheel Washer CT150-29 Grip Rubber CT150-04 Wheel Cover CT150-30 Rotor CT150-05... - Page 5 CUTTER(SAW) Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks which may help avoid discomfort and fatigue. 3.
- Page 8 the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary.
Need help?
Do you have a question about the ST-CT150 and is the answer not in the manual?
Questions and answers