Table of Contents
Advertisement
Quick Links
SUMAKE
Specification:
Free Speed
Cutting Capacity
Air Consumption
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD.
4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan
PNEUMATIC TOOLS
3" Cut-Off Tool (W/Wheel)
ST-M5068
15,000 r.p.m.
3"
13 CFM (368 L/min)
8-1/6" (210 mm)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
2 lbs (0.93 kg)
Noise and Vibration:
Vibration
EN ISO 28927-4
Sound Pressure Level
No load: 95 dB(A)
Load:
1.63 m/s²
Sound power level
No load: 105 dB(A)
Uncertainty
²
K= 0.65 m/s
Noise
Remark
EN ISO 15744
Please always
wear ear
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
Uncertainty
hearing!
K= 3dB
ST-M5068-S-1803C-D5F
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sumake ST-M5068
Summary of Contents for Sumake ST-M5068
- Page 1 Air Pressure 90 psi (6.3 bar) Uncertainty Uncertainty hearing! ² K= 0.65 m/s K= 3dB Net Weight 2 lbs (0.93 kg) SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan ST-M5068-S-1803C-D5F...
- Page 2 DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： 3" CUT-OFF TOOL (W/WHEEL) Model/ Serial No.：ST-M5068 to which this declaration applies, complies with these normative documents: ...
- Page 3 Other factors outside the tool may cause loss of power or erratic action Reduced compressor output, excessive drain on the air line. moisture or restrictions in air pipes or the use of hose connection of improper size or poor ST-M5068-I-1112A-D5...
- Page 4 ST-M5068 3" CUT-OFF TOOL (W/WHEEL) PARTS LIST No. Parts No. Description Q'ty No. Parts No. Description Q'ty M5068-01 Wheel Cover M5068-20 Throttle Lever Ass'y M5068-02 Cap Screw M5068-21 Spring Pin (Φ3x20) M5068-03 Pan Head Screw (M6x12) M5068-22 Valve Body M5068-04...
- Page 5 CUTTER(SAW) Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 The tool has been manufactured in conformity with the instruction of EU machine directive. The EU mark will be considered void in the event of inexpert repairs, the use of non-original parts and in case of non-observance of the safety instructions in the user’s manual. Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 other parts of the body. 2. While using the tool, the operator should adopt a comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks which may help avoid discomfort and fatigue. 3.
- Page 8 the hazard, the risk of injury and the avoidance action to take. General preparation and connection: Before connecting the air hose, apply 4 to 5 drops of SAE#10-20 spindle oil at the air inlet. Also, every 3 to 4 hours of operation, oiling is necessary.
Need help?
Do you have a question about the ST-M5068 and is the answer not in the manual?
Questions and answers