Table of Contents
Advertisement
TL-WN512AG/TL-WN552AG/TL-WN553AG
Chapter 3. Configuration
TP-LINK Wireless Adapter TL-WN512AG/TL-WN552AG/TL-WN553AG can be configured by
TP-LINK Wireless Client Utility (TWCU). This chapter describes how to configure your TP-LINK
Wireless Adapter for wireless connectivity on your Wireless Local Area Network (WLAN) and use
the data security encryption features.
After Installing the Adapter, for the first time a region selector box appears, as shown in Figure
3-1.Select your region and click OK.
The Adapter's tray icon
screen, and shows the signal strength using color and the received signal strength indication
(RSSI).
If the icon is gray, there is no connection.
If the icon is red, there is poor signal strength and the RSSI is less than 5dB.
If the icon is yellow, there is poor signal strength and the RSSI is between 5dB and 10dB.
If the icon is green, there is good signal strength and the RSSI is between 10dB and 20dB.
If the icon is green, there is excellent signal strength and the RSSI is more than 20dB.
Double-click the icon and the TWCU utility will run. You can also run the utility by clicking the
Start>Program>TP-LINK>TWCU 4.1.2.94>TP-LINK Wireless Client Utility. The TWCU utility
provides a complete set of easy managed tools to:
Display current status information
Edit and add configuration profiles
Display current diagnostics information
The section below introduces these above capabilities.
Figure 3-1 Region Selector
will appear in your system tray. It appears at the bottom of the
12
54M Wireless Adapter User Guide
Advertisement
Table of Contents
