Table of Contents
Advertisement
Power Save Mode - Select the power save mode.
•
None - Turns power saving off, thus powering up the Wireless PCI Adapter continuously
for a short message response time.
•
Min - Normal mode uses max when retrieving a large number of packets, and then
switches back to power save mode after retrieving the packets.
•
Max - Selects max mode to let the access point buffer incoming messages for the
Wireless PCI Adapter. The Adapter will detect the access point if any messages are
waiting periodically.
Wireless Mode - Select the wireless mode for the network: 802.11b, 802.11g/b. The
Wireless PCI Adapter must match the wireless mode of the access point with which it
associates.
Click Set Defaults to restore the configuration to defaults.
Click Apply to make all the configurations to be effective.
3.6 Status
Click the tab Status as shown in Figure 3-13 to view the information about the connection.
TL-WN353GD
54M Wireless PCI Adapter User Guide
Figure 3-12
22
Advertisement
Table of Contents
