Chapter 1 Introduction
Thank you for choosing the TL-WN353G 54M Wireless PCI Adapter!
1.1 Overview of the Product
The adapter will provide you the flexibility to install your PC in the most convenient location
available, without the cost of running network cables.
The Adapter's auto-sensing capability allows high packet transfer rate of up to 54Mbps for
maximum throughput, or dynamic range shifting to lower speeds due to distance or operating
limitations in an environment with a lot of electromagnetic interference. It can also interoperate
with all 11Mbps wireless (802.11b) products. Your wireless communications are protected by up
to 152-bit WEP and WPA encryption for high security.
Complies with IEEE802.11g, IEEE802.11b standards
Supports WPA/WPA2 data security, IEEE802.1x authentication, TKIP/AES encryption,
64/128/152-bit WEP encryption
Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/2/1Mbps wireless LAN data transfer rates
Provides 32-bit PCI interface
Supports Ad-Hoc and Infrastructure modes
Supports roaming between access points when configured in Infrastructure mode
Ease to configure and provides monitoring information
Supports Windows 98, ME, 2000, 2003, XP, Vista, XP64
Supports fixed antenna
1.3 LED Status
The adapter is in an electricity saving status or
the adapter is already connected but is not
transmitting or receiving data.
The adapter is on wake up status.
The adapter is transmitting and receiving data.
54M Wireless PCI Adapter User Guide