Advertisement
Installation
Removing the transit bolts
• Before installing the washing machine, you must remove the transit bolts from the
back of the housing and cover the holes with the transit hole caps provided.
• The bolts hold the drum in place during transport but they must be removed
before use so the drum can move during the wash and spin cycles.
Leaving the bolts installed will result in strong shock and noise during use,
malfunction and serious damage to the machine.
• Open the package, remove the packaging base and move the washing machine to
the installation location.
• Dismantle the four transit bolts (B), rubber pads and plastic rods (A) from the back
of the machine (Fig. 2a). Please note, if the transit bolts are not removed, they may
cause intense vibrations, noise and other issues.
• Keep the bolts in a safe place; you will need them again if you ever want to move the
machine in the future.
• Cover the holes with the supplied transit hole caps (Fig. 2b).
Fig. 2a
10
(AU) 1300 886 649 (NZ) 0800 836 761 |
WARNING!
Fig. 2b
After Sales Support
tempo.org/support
Advertisement
