Table of Contents
Advertisement
en Familiarising yourself with your appliance
4 Familiarising yourself with your appliance
The instruction manual is the same for various different
hobs. You can find the hob dimensions in the overview
of models. → Page 2
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
4.2 Indicators/symbols
The displays show selected values and functions.
Display
Name
-
Heat settings
/
Residual heat
Electronic boil start control
Timer
4.3 Touch fields
Touch fields are touch-sensitive surfaces. To select a
function, touch the relevant field.
Touch
Name
field
Main switch
Electronic boil start control
Hotplate selection
Childproof lock
Wipe protection
5 Basic operation
5.1 Switching the hob on or off
The main switch is used to switch the hob on and off.
If you switch the appliance back on again within
4 seconds after switching off, the hob will start up with
the previously stored settings.
6
Touch
Name
field
Settings range
Timer
Notes
¡ Always keep the control panel dry. Moisture impairs
the function.
¡ Do not pull pans close to the displays and touch
fields. The electronics may overheat.
4.4 Residual heat indicator
The hob has a two-stage residual heat indicator for
each hotplate. Do not touch the hotplate while the re-
sidual heat indicator is lit up.
Display
Meaning
The hotplate is so hot that you can
keep small dishes warm or melt cook-
ing chocolate.
The hotplate is hot.
5.2 Switching on the hob
Touch
.
▶
a The indicator lamp above
a The
displays light up.
a The hob is ready for use.
lights up.
Advertisement
Table of Contents
