Statistics - TP-Link TL-WR543G User Manual

4.13.8 Statistics

The Statistics page (shown in Figure 4-61) displays the network traffic of each PC in LAN,
including total traffic and traffic of the last Packets Statistic interval seconds.
Current Statistics Status - Enable or Disable. The default value is disabled. To enable,
click the Enable button. If disabled, the function of DoS protection in Security settings
will be ineffective.
Packets Statistics Interval - The default value is 10. Select a value between 5 and 60
seconds in the pull-down list. The Packets Statistic interval indicates the time section of
the packets statistic.
Sorted Rules - Here displays sort as desired
Statistics Table:
IP Address
Packets
Total
Bytes
Packets
Bytes
ICMP
Tx
Current
UDP
Tx
TCP
SYN
Tx
Click the Save button to save the Packets Statistic interval value.
TL-WR543G 54M Wireless AP Client Router User Guide
Figure 4-61 Statistics
The IP Address displayed with statistics
The total amount of packets received and transmitted by the router.
The total amount of bytes received and transmitted by the router.
The total amount of packets received and transmitted in the last Packets
Statistic interval seconds.
The total amount of bytes received and transmitted in the last Packets
Statistic interval seconds.
The total amount of the ICMP packets transmitted to WAN in the last
Packets Statistic interval seconds.
The total amount of the UDP packets transmitted to WAN in the last
Packets Statistic interval seconds.
The total amount of the TCP SYN packets transmitted to WAN in the last
Packets Statistic interval seconds.
- 63 -