TP-Link TL-WR543G User Manual page 36

TL-WR543G
Figure 4-16 Wireless Settings in AP Client Router mode
SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all
wireless devices in your network. The default SSID is TP-LINK, but it is recommended
strongly that you change your networks name (SSID) to a different value. This value is
case-sensitive. For example, TP-LINK is NOT the same as tp-link.
Enable Wireless Security - The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the router without encryption. It is
strongly recommended that you choose this option to encrypt your wireless network. The
encryption settings are described below.
Security Type - You can select one of the following authentication types:
•
WEP - Select WEP authentication type based on 802.11 authentications.
•
WPA-PSK/WPA2-PSK - Select WPA/WPA2 authentication type based on pre-shared
passphrase.
•
WPA /WPA2 - Select WPA/WPA2 authentication type based on Radius Server.
Security Options - You can select one of the following authentication options:
•
When you select WEP for authentication type you can select the following
54M Wireless AP Client Router User Guide
- 28 -