Multicut-2S Multicut-Se Multicut-Quick - Hegner Multicut-1 Original Operating Instructions

EC- Conformity Declaration for
Super- Universal - Fine Cut Saws
Multicut-1
Multicut-2S
Multicut-SE
Multicut-Quick
We declare on our sole responsibility that the product described under
technical data complies with the following conditions:
- 2006 / 42 EC Machine directive
- 2004 / 108 EC EMC directive
- 2006 / 95 EC Low voltage directive
The following regulations were applied to the construction and design of the machine.
Harmonised standards:
- EN 12100 -1
- EN 12100 - 2
- EN 294
- EN 349
- EN DIN 61000
- EN 60529
- EN 60204-1
For the machine, a construction test to § 7 of the Machine Safety Law
(GPSG) was performed by the
Trade Association for Wood
Test and Certification Centre in the BG-PRÜFZERT
Vollmoellerstraße 11
70563 Stuttgart
and
GS test certificate number 071156 and
BG test certificate number 071157
were issued.
Hegner Präzisionsmachinen GmbH
Lupfenstraße 29
78056 VS-Schwenningen
VS-Schwenningen, 12.08.2010
Werner Broghammer
Technical Manager