Table of Contents
Advertisement
Quick Links
INSTALLATION MANUAL
Medicine Cabinet
MMC1536 / MMC1930 / MMC2330
Read all instructions carefully before proceeding.
Record the serial number on the back page and save this guide for future reference.
Familiarize yourself with all the parts as shown in the exploded view. The exploded view will also provide a helpful reference
when relating to the location of the various parts and how they are mounted.
© 2022 FGI Industries, Ltd. | CRAFT + MAIN® and logo design are registered trademarks of FGI Industries, Ltd.
USA: www.craftandmain.com | CANADA: www.craftandmain.ca
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Craft+Main MMC1536
Summary of Contents for Craft+Main MMC1536
- Page 1 INSTALLATION MANUAL Medicine Cabinet MMC1536 / MMC1930 / MMC2330 Read all instructions carefully before proceeding. Record the serial number on the back page and save this guide for future reference. Familiarize yourself with all the parts as shown in the exploded view. The exploded view will also provide a helpful reference when relating to the location of the various parts and how they are mounted.
-
Page 2: Exploded View
EXPLODED VIEW MAINTENANCE Never use scouring powder pads, abrasive material, or sharp instruments on metal components or glass. Ammonia or vinegar based cleaners can damage mirrors. An occasional wiping down with a mild soap diluted in water is all that is needed to keep the mirror and aluminum parts looking new. -
Page 3: Parts List
PARTS LIST CLEAR SHELF CLIP SCREW #10 x 1-1/2 DOOR (1 pc) HOLE PLUG (4 pcs) CABINET (1 pc) (6 pcs) (5 pcs) MOUNTING BRACKET SCREW HEAD TOP Z-CLIP (2 pcs) WALL PLUG (5 pcs) GLASS SHELF (3 pcs) (1 pc) COVER CAP (4 pcs) DECORATIVE COVER SIDE PANELS (2 pcs) -
Page 4: Installation
INSTALLATION Determining Measurement and Direction: Model No. Height Width Depth Tolerance 1930 29" 18-1/2" 4" ± 1/8" 2330 29" 22-1/2" 4" ± 1/8" 1536 35" 13-3/4" 4" ± 1/8" Fig 1 Fig 2 If desired, rotate the unit so the door swings open in the opposite direction. Left hand operation Right hand operation... - Page 5 INSTALLATION Recessed or semi-recessed 1. Peel o the side kits from the cabinet as shown. 2. Make sure hinges are on correct side of opening for left hand or right hand operation. Place cabinet box into rough opening. On fully recessed applications, make sure the cabinet flange covers the rough opening evenly on all sides (Fig 3).
-
Page 6: Surface Mounted
INSTALLATION Surface Mounted If installing in combination with a middle mirror/shelf kit, please see “Center Mirror/Shelf Kit installation” directions that came with your center mirror prior to performing the steps below. 1. Establish precise height and draw a level horizontal line (Fig 6). IMPORTANT: Position medicine cabinet at precise height. - Page 7 INSTALLATION 4. Insert surface mount z-clips ⑥ as shown (Fig 9 & 10). Fig 9 Fig 10 5. Place cabinet into wall bracket (Fig 11). Mark hole locations of z-clips (Fig 12). When determining location, it is recommended that at least one z-clip be located at a stud. Detach cabinet and drill 8 mm hole if needed for anchor, and place in anchor in hole.
-
Page 8: Installing Door
INSTALLATION Installing Door 1. Remove protective packaging from door. Be careful not to bump edges of mirror. Line hinges up against hinge mounting plates. Snap into position (Fig 14). Mounting Plate Snap into position Pull to release Fig 14 2. Door should “snap” locked when about 1" from being fully closed. Door should be placed evenly in relation to cabinet. -
Page 9: Installing Shelves
INSTALLATION Installing Shelves 1. Insert clear shelf clip ② into appropriate hole location using two clips per shelf (Fig 16). Fig 16 2. Place glass shelf ⑨ on top of clear shelf clips, making sure shelf is against back of cabinet. Press lightly to adhere the shelf clip sticker (Fig 17). - Page 10 INSTALLATION Installing Coordinating Side Panels Coordinating Side Panels (2 pcs)
-
Page 11: Limited Warranty
WARRANTY REGISTRATION: CUSTOMER SERVICE: To receive warranty coverage for your purchase, you must U.S. CUSTOMERS: 1-888-620-3667 complete the warranty registration form found on our Monday - Friday, 7:00 a.m. - 5:00 p.m., CT website within 30 days of purchase, or provide valid proof www.craftandmain.com | customerservice.us@fgi-industries.com of purchase detailing the date and location of your purchase.
Need help?
Do you have a question about the MMC1536 and is the answer not in the manual?
Questions and answers