Part 7: Resetting To Factory Settings; Battery Charging - HOMCOM 830-472 Assembly Instruction Manual

PART 7: Resetting to factory settings

To reset the shades, you can use the remote control or the button on the motor head.
It is recommended to use the remote control if possible.
Using the remote control (easier option):
1. Hold 'STOP' for five seconds – the motor will jog once.
2. Within 10 seconds, hold 'LEARN' for seven seconds. The motor will jog once for one
second, then again for seven seconds.
Using the motor head (pressing 'PROGRAM' twice, then holding 'PROGRAM' twice):
1. Hold 'PROGRAM' for one second – the red light flashes once.
2. Hold 'PORGRAM' for one second – the red light flashes once.
3. Hold 'PROGRAM' for three seconds – the red light flashes once.
4. Hold 'PROGRAM' for three seconds – the motor will jog twice.
5. The motor should now be back to factory settings.

BATTERY CHARGING

There is a built-in rechargeable battery back in the motor. Follow these steps to fully
charge.
When not in use for a long period, ensure it gets charged every two months.
1. Plug one end of the provided cable into a socket outlet.
2. Plug the micro-USB into the charging port of the motor head.
3. It will be fully charged in four hours. The indicator will be red when charging, then it
will turn green when fully charged.
4. Unplug the charger when fully charged.
-11-