Error Message - WaterTech SOFTMAX PRO Owner's Manual

DISPLAYS & PROGRAMMING
CLOCK / HOME
LEFT / BACK
SETTING REGENERATION TIME
Enter the Installer Screens by pressing and holding
3-5 seconds.
Once the display changes, press
When on the "Regeneration Time" display, use
cycle through AM and PM.
Press to move the cursor to adjust the minutes. Use
Advance to the next Installer Screen by pressing
by pressing

ERROR MESSAGE

SOFT RESET (to reset "ERROR" code)
Press and hold
If the word "ERROR" persists, afer a soft reset, and a number is alternately flashing on the
display, contact an authorized WaterTech dealer for service help. This indicates that the valve
was not able to function properly. This is a rarely encountered malfunction.
until you reach the "Regeneration Time" display.
+ REGEN simultaneously for 3-5 seconds until valve resets.
RIGHT / NEXT
+
simultaneously for
or to adjust the hour. The hours will
or to adjust the minutes.
OR you can return to the home display
4